Informace

Follow us YouTube

Become our fan on YouTube, watch our channel

Důvody proč u nás nakupovat.

Glazura PK 580, Zlatohnědá (1050-1150°C)

040120

Krycí hnědá glazura s floty


Základní cena při odběru 1–9,5 kg.

Při odběru 0,5 kg přirážka 10%,

při odběru 10 kg sleva 10%,

při odběru 25 kg sleva 25%.

More details

Transportation costs:
  • Preview shipping costs for your order can be found in the top right basket.
Add to new Compare

You cannot add more than 3 product(s) to the product comparison

 Celkové hodnocení:

5
5,00/5 - 1 recenze

Zobrazit hodnocení
1
0
0
0
0

 Přidat hodnocení Zobrazit recenze Zobrazit recenze

Powdered effect glaze intended for the own preparation of the glazing suspension. This glaze is recommended to be applied in a layer according to the specification below. The glaze is lead-free, does not contain hazardous substances and is suitable for use in hobby organizations and school workshops.

The recommended firing range for PK effect glazes is 1020 - 1080°C, and they can usually be fired up to 1150°C without problems. However, temperatures above 1100°C usually result in a change of colour shade. The glazing slurry is mixed to a density according to the chosen application technique and the absorption of the bisque. Typically, 0,6 – 0,8 l of water is added per 1 kg of glaze powder. Dust may be released when handling dry glaze, protect the airways. It is recommended to prepare the suspension at least one day before glazing, use anti-sedimentation additives as required. Mix the glaze well before using it. Some PK glazes contain small effect particles and therefore cannot be sieved or spray applied. Follow the information on the label of the particular glaze.

PK powder glazes are packed in 1 kg bags in transparent PE bags. The packaging is labelled with the recommended procedure individually for each glaze. Powder glazes do not have a limited shelf life, store them indoors and protect them from moisture.

 

Data sheet

Designod 80 l do 110 l test
Usageod 80 l do 110 l test
Motorod 80 l do 110 l test
Wheal-head directionod 80 l do 110 l test
Heatingod 80 l do 110 l test
Volume categoryod 80 l do 110 l test
Thickness of slabod 80 l do 110 l test
Cylinder widthod 80 l do 110 l test
Compositionod 80 l do 110 l test
Dimension of slabod 80 l do 110 l test
Rotation speedod 80 l do 110 l test
Constructionod 80 l do 110 l test
Noise levelod 80 l do 110 l test
Speed controlod 80 l do 110 l test
Controlod 80 l do 110 l test
Approximate capacityod 80 l do 110 l test
Adjustable heightod 80 l do 110 l test
Working height of the wheel-headod 80 l do 110 l test
Table-top modelod 80 l do 110 l test
Wheal-headod 80 l do 110 l test
Free rotation at 0 rpmod 80 l do 110 l test
Splash panod 80 l do 110 l test
Dimensionsod 80 l do 110 l test
Furnace typeod 80 l do 110 l test
Formpowder
Colorod 80 l do 110 l test
Number of mould partsod 80 l do 110 l test
Covertnesscover
Usageod 80 l do 110 l test
Surfaceglossy
Effectyes
Volumeod 80 l do 110 l test
Max. temperatureod 80 l do 110 l test
Inner dimensionsod 80 l do 110 l test
Recommended firingod 80 l do 110 l test
Outer dimensionsod 80 l do 110 l test
Connected loadod 80 l do 110 l test
Voltageod 80 l do 110 l test
Currentod 80 l do 110 l test
Socket typeod 80 l do 110 l test
Heating elementsod 80 l do 110 l test
Switchingod 80 l do 110 l test
Additional back insul.od 80 l do 110 l test
Gas dampers support lid openingod 80 l do 110 l test
Air inletod 80 l do 110 l test
Base castorsod 80 l do 110 l test
Standard controllerod 80 l do 110 l test
Controller for surchargeod 80 l do 110 l test
Recommended application layer2 - 3 mm
Chamotte contentod 80 l do 110 l test
Type of matterod 80 l do 110 l test
Colourod 80 l do 110 l test
Shapeod 80 l do 110 l test
Product dimensions after firing approx.od 80 l do 110 l test
Number of pieces in setod 80 l do 110 l test
Materialod 80 l do 110 l test
Sizeod 80 l do 110 l test
Useod 80 l do 110 l test
Shrinkage during dryingod 80 l do 110 l test
Firing shrinkage by 1000°Cod 80 l do 110 l test
Firing shrinkage by 1100°Cod 80 l do 110 l test
Firing shrinkage by 1200°Cod 80 l do 110 l test
Firing shrinkage by 1300°Cod 80 l do 110 l test
Water absorption by 1000°Cod 80 l do 110 l test
Water absorption by 1100°Cod 80 l do 110 l test
Water absorption by 1200°Cod 80 l do 110 l test
Water absorption by 1300°Cod 80 l do 110 l test
Weightod 80 l do 110 l test
Ship weightod 80 l do 110 l test

Accessories

Recenze Recenze (1)

Cekové hodnocení:
0 1 2 3 4
5,00/5
Na základě 1 recenze Napsat hodnocení
0 1 2 3 4
(5/5
0 z 0 lidé označující recenzi za užitečnou
Hodnocení:0 1 2 3 4

Překrásná glazura, která překvapí a potěší. Jinak vypadá na plochách vodorovných, jinak na svislých, což tvoří zajímavé přechody.

Stránka: 1

Download

Price list of design materials

Complete price list of glazes PD, effect glazes PK, engob SE, crushed glass GS and dyes for ceramic workshops in CZK and EUR.

Download (786.17k)

other products in the same category: 30