Informace

Poslední recenze produktu

Zákazník ohodnotil produkt, ale neodeslal recenzi nebo čeká na kontrolu administrátorem
Od Silvie Z16.06.2022

Follow us YouTube

Become our fan on YouTube, watch our channel

Důvody proč u nás nakupovat.

Chamber kilns Nabertherm

Chamber Kilns, Heated from Five Sides

Chamber ceramic kiln Nabertherm N 300Chamber ceramic kiln Nabertherm N 440
Chamber kiln N 300Chamber kiln N 440
Heating elements of chamber kiln Nabertherm

Heating from five sides and a special
arrangement of the the heating elements
ensure optimal temperature uniformity

Semi automatic air inlet flap of chamber kilns Nabertherm
Semi-automatic air inlet flap for residual
drying in chamber kilns up to 300 liters.
The flap closes automatically at a set
temperature and does not have to be closed
manually after the drying phase.

First-class craftsmanship, professional design, long service life and excellent temperature uniformity – chamber kilns from 100 liters up to 2200 liters round off the range of kilns for professionals. These kilns have proven their worth for many years, firing porcelain and stoneware and annealing glass, even when tightly stacked and at high working temperatures. You will find these chamber kilns in ceramic workshops, studios, clinics, schools and in private homes. They are recommended for frequent firing, when the kilns are tightly stacked and when excellent temperature uniformity is needed.

A kiln should not be operated permanently to its performance limits. If the kiln is often fired to its performance limits, we recommend our chamber kilns to 1340 °C. Most chamber kilns are available from stock.

Standard design

  • Heating elements on support tubes ensure free heat radiation
  • Heating from five sides and a special arrangement of the heating elements ensure optimum temperature uniformity
  • Scope of delivery includes SiC floor plates to protect the floor heating and provide for safe stacking of the kiln furniture
  • Base included in scope of delivery
  • Door cover made from structured stainless steel
  • Semi-automatic air inlet flap that closes automatically after the drying phase in the firing program for chamber kilns up to 300 liters
  • Motor-driven exhaust air flap in the middle of the kiln roof for optimum ventilation of the kiln with chamber kilns from 440 liters
  • Defined application within the constraints of the operating instructions

Model

Tmax 

Inner dimensions in mm

Volume 

Outer dimensions3 in mm

Connected 

Electrical 

Weight 

°C

w

d

h

in l

W

D

H1

load kW

connection* 

in kg

N 1001300400530460100720113014409,03-phase275
N 15013004505305901507701130157011,03-phase320
N 20013004705307802007901130176015,03-phase375
N 30013005507007803008701300176020,03-phase450
N 4401300600750100045010001400183030,03-phase780
N 66013006001100100065010001750183040,03-phase950
N 1000130080010001250100013901760200057,03-phase1800
N 1500130090012001400150014901960215075,03-phase2500
N 220013001000140016002200159021602350110,03-phase3100
            
N 100/H13404005304601007601150144011,03-phase325
N 150/H13404305306201507901150160015,03-phase380
N 200/H13405005307202008601150170020,03-phase430
N 300/H13405507007803009101320176027,03-phase550
N 440/H1340600750100045010001400183040,03-phase880
N 660/H13406001100100065010001750183052,03-phase1080
N 1000/H134080010001250100013901760200075,03-phase2320
N 1500/H1340900120014001500149019602150110,03-phase2700
N 2200/H13401000140016002200159021602350140,03-phase3600
1Base included *Please see page 40 for more information about supply voltage
2External dimensions vary when furnace is equipped with additional equipment. Dimensions on request

Chamber Kilns, Heated from Three Sides

Chamber ceramic kiln Nabertherm N 280EChamber ceramic kiln Nabertherm N 140E
Chamber kiln N 280 EChamber kiln N 140 E
Chamber ceramic kiln Nabertherm N500Eerm
Chamber kiln N 500 E
Heating elements in grooves - chamber kilns Nabertherm
Three-sided heating with heating elements
protected in grooves (N 140 E - N 280 E)
Heating elements on support tubes - chamber kilns Nabertherm
Three-sided heating with heating elements
on support tubes (N 500 E)

Due to their good price-performance ratio, the Nabertherm chamber kilns heated from three sides are suitable for use in schools, kindergartens or occupational therapy. The heating elements are protected in grooves. For an intensive, professional use, we recommend our five-side heated chamber kilns.

The dual-shell, back-ventilated housing keeps the housing temperature low. A semi-automatic air inlet flap is included with standard scope of delivery. After the drying phase in the heating program, the flap closes automatically at a chosen temperature. No base flap has to be closed manually. The controller can be removed from the door bracket for convenient operation.

Standard design N 140 E - N 280 E

  • Heating elements protected in grooves
  • Heating from three sides (both sides and floor)
  • Scope of delivery includes 3 ceramic supports and lower shelf to protect the bottom insulation and for safe stacking of the kiln furniture
  • Base included in scope of delivery
  • Defined application within the constraints of the operating instructions

Standard design N 500 E

  • Freely radiating heating elements on support tubes
  • Heating from three sides (both sides and floor)
  • Scope of delivery includes SiC floor plate for even stacking of the kiln furniture
  • Motor-driven exhaust air flap in the middle of the kiln roof for optimal ventilation of the kiln
  • Defined application within the constraints of the operating instructions

Model

Tmax

Inner dimensions in mm

Volume

Outer dimensions4 in mm

Connected

Electrical

Weight

°Cwdhin lWDH1load kWconnection*in kg
N 140 LE110045025805703140720113014406,01-phase4275
N 210 LE110050025807003210770113015709,03-phase320
N 280 LE110052025808903280790113017609,03-phase375
N 140 E130045025805703140720113014409,03-phase275
N 210 E1300500258070032107701130157011,03-phase320
N 280 E1300520258089032807901130176015,03-phase375
N 500 E1300600820100050010001400183030,03-phase700
1Base included 3Collar height minus 110 mm
2Collar width minus 50 mm *Please see page 40 for more information about supply voltage
4External dimensions vary when furnace is equipped with additional equipment. Dimensions on request

Chamber Kilns, Heated from Two Sides

Chamber ceramic kiln Nabertherm N 70 EChamber ceramic kiln Nabertherm N 40 E
Chamber kilns N 70 E with base as an accessoryChamber kiln N 40 E as a tabletop model

Designed as chamber kilns with wide-opening door these models can be easily and clearly loaded. The appealing design and attractive price are convincing arguments for this kiln series. The heating elements are protected in grooves.

The kilns can be used for ceramics and glass or porcelain painting or also for simple fusing works. Most chamber kilns are available from stock. The infinitely adjustable air inlet opening in the door and the exhaust air opening in the roof ensure good ventilation inside the kiln and reduce cooling times.

Standard design

  • Heating elements protected in grooves
  • Heating from both sides
  • Designed as a tabletop model, base available as an accessory
  • Infinitely adjustable fresh air inlet
  • Scope of delivery includes an option for connecting an exhaust air pipe (80 mm diameter)
  • Dual shell housing for low outer temperatures
  • Defined application within the constraints of the operating instructions

Model

Tmax

Inner dimensions in mm

Volume

Outer dimensions3 in mm

Connected

Electrical

Weight

°Cwdhin lWDH2load kWconnection*in kg
N 40 E1300350330350406408006002,91phasing90
N 40 E/R1300350330350406408006005,53-phase190
N 70 LE1200400380450706908507002,91phasing120
N 70 E1300400380450706908507003,61phasing120
N 70 E/R1300400380450706908507005,53-phase1120
N 100 LE11004604405001007509107505,53-phase150
N 100 E13004604405001007509107507,03-phase150
1Heating only between two phases *Please see page 40 for more information about supply voltage
2Height with base + 700 mm
3External dimensions vary when furnace is equipped with additional equipment. Dimensions on request

Advantages of Nabertherm chamber kilns

Multi-layer insulation chamber kiln NaberthermMulti-layer insulation with light-weight refractory bricks and energy-saving backing insulation adapted to the maximum kiln temperatureNekarcinogenní izolace komorové pece NaberthermOnly insulation materials that are not classified as carcinogenic according to TRGS 905, Class 1 or 2 are used
Durable light-weight refractory brick chamber kiln NaberthermDurable light-weight refractory brick insulation inside the kiln ensures clean firing resultsDvojtý plášt - komorová pec NaberthermDual-shell housing provides for low temperatures and optimal corrosion protection. Galvanized steel sheets on the sides
Self-supporting sealing of chamber kiln NaberthermRugged, self-supporting, vaulted arch constructionDoor seal „brick on brick“ chamber kiln NaberthermDoor seal „brick on brick“, precisely ingrained by hand to ensure tight sealing
Výsuvné dno u komorových pecí Nabertherm NWErgonomic charging height with 800 mm base (chamber kiln N 50 E = 500 mm)Spínání pomocí relé keramické pece NaberthermSolid state relays ensure low-noise heater operation
Bezpečnostní spínač dveří komorových pecí NaberthermProtected door contact switchPřivzdušnovací klapka komorova pec NaberthermInfinitely adjustable air inlet damper for optimal air supply during firing and reduced cooling times included in the scope of delivery for chamber kilns from 440 liters
Regulátor na dveřích komorových pecí NaberthermController mounted on kiln door and removable for comfortable operationPoloautomatická přivzdušnovací klapka - komorová pec NaberthermSemi-automatic air inlet flap for residual drying in chamber kilns up to 300 liters. The flap closes automatically at a set temperature and does not have to be closed manually after the drying phase.
Komínek u komorových pecí NaberthermExhaust air opening in the center back of the kiln roof ensures even extraction of the exhaust air in chamber kilns up to 300 litersMotorická klapka komorová pec NaberthermMotor-driven exhaust air flap in the middle of the kiln roof provides for optimal ventilation of the kiln for chamber kilns from 440 liters